TASKLED - Smart LED drivers
home > products (piezo switch)
Stainless Steel Piezo switch, 12mm
Can be used with the Piezotg board:
- Dive Lights
- Bike Lights
- Outdoor lights
Momentary action. Comes with o-ring.
- Solid State momentary action Piezo Switch, 31cm (12" nominal) twisted pair leads.
- Operates from AC/DC (24V maximum), 200mA maximum switch current.
- Can be directly wired to a Piezotg board to create a latched high current switch for battery operated equipment.
- Stainless Steel, Non-magnetic.
- Polarity independent operation.
compatible with Taskled Flex based drivers due to only supporting short
duration 'clicks'. i.e. can NOT be used with
lflex/dualflex/b3flex/h6flex/hbflex as the 'momentary' action switch.
For Flex based drivers a Prolongated Piezo switch is required.
Piezo Switches are water proof and operate on
the piezo-electric principle. These switches contain an internal
circuit to provide a switched output (normally open circuit).
home | products | technical | order products | contact
©2017 TaskLED. All Rights Reserved.